Composition of The Faucet
There is the basin tap in each of our home, and every day in our life, the faucet is used. Whether you ignore it or not, it is already part of your life, so understand the structure of a faucet. It is helpful to buy a faucet and use a faucet to avoid it causing us unnecessary trouble.We look at the appearance of the faucet, there are handles, valve body, bubbler, base, if not installed, we can also see the water supply hoses, the installation horseshoe and the mounting screw, etc., the heart part of the faucet is the cartridge which is connected to the handle above, and the water supply hose below.Let's analyze the function of each component of the basin mixer taps, as well as the material and the resolution.1, the handle is mainly to control the opening and closing of the cartridge, to adjust the amount of water in the hot and cold water. Generally speaking, the handle is made of alloy, the alloy is easy out of shape, and it is relatively hard and relatively low in cost. This is a wearing part, and it is easy to replace if it is damaged. If the handle made of copper will be easily deformed and bent, but it is not easy to shape with stainless steel.2, The bubbler can mix the water and air flowing through, not only can effectively reduce the water flow speed, so that the water flow hits the hands and the basin does not splash, but also can save a lot of domestic water. Because the mixing mechanism of the internal flow field of the bubbler is one of the key factors determining the effect of the water.3, Cartridge, also has the main body, housing, body and other names, mainly the valve core, the fixed parts, a carrier of the internal waterway. It is an object in which a valve core, a mounting fixture, a water-water member, and the like are connected together, and the interior is designed to have a path of flowing cold water, hot water, and mixed water. The valve body is integrally formed, and also composed of multiple parts, which is determined according to the shape requirements and cost control of the faucet. Its main material is made of brass, according to process requirements and cost control, there are also stainless steel valve body, zinc alloy valve body, plastic valve body and so on.4, the installation of the fixed seat is actually a part of the valve body, the most important is easy to install, and there is an O-shaped rubber ring with the table top, one is the sealing function, so that the water on the table surface does not seep down the table, the second is A little anti-slip effect prevents the valve body from sliding on the table.5, the water inlet hose is mainly connected to the water source to the valve core equipment, commonly used stainless steel braided hose, the outer layer is stainless steel wire braided, inside is a silicone hose or PEX-B hose core, PVC used previously, The hose of EPDM material has not met the requirements of the endotube microbial toxicity W270 test. The inner tube is required to perform the microbial toxicity W270 test.6, fixing parts Commonly used horseshoe-shaped fixing parts or cylindrical nut fixing parts can play the role of fixing the faucet to the table top. For the small faucet of the faucet, it is convenient and quick to install with the horseshoe-shaped fixing member, but for some large faucets, the fixing member of the cylindrical nut is relatively firm.Read More>>
Bathroom hardware accessories - what kind of dispenser should Australia use for?
As we all know, our family cannot lack a wash basin. Whether it is the wash basin in the bathroom, the sink in the kitchen, or the laundry cabinets, a drainer is required to fully connect to the drainage system inside the house.Although it is only a small accessory, it is a big problem in Australia, especially the water purifier purchased from China. Many Australian importers who came to China for the first time often lacked the purchasing experience in China and careless about the purchase of products. They ignored the adaptability of the gadgets of the wastes, which made it difficult to find the purchase. Although the value of the wastes is not high, it is because of a small accessory that delays the work of the worker and causes high labor costs.So what kind of water device should Australia be equipped with?KEDIBO Sanitary Ware, which has 10 years of experience in Australian bathroom supply, tells you:First, let's first get to know Australia's sewage system. The size of the commonly used sewage pipes in Australia is very different from that in China. They often use larger sewage pipes than domestic ones. The sewage pipes of the wash basins use 40DN sewage pipes, and the sewage pipes of kitchen sinks use 50DN sewage pipes. So this is why our domestic basin water purifier or kitchen sink water purifier is not worthy of the Australian sewage pipe.Second, what kind of water waste should we use to qualify for the Australian sewage pipe? In the description of the product we usually use, the basin drainer, we should use the G 1 1/2” water purifier to match the 40DN drain pipe; the kitchen sink drainer, we should use the G 2” drainer Match the 50DN drain pipe.At this point, you may have questions about the basin drainer? The 1 1/2” water heater can not be inserted into the ceramic basin. The water drain of our ceramic basin is generally 45mm in diameter. Can it be inserted with a 46.7mm diameter water purifier?Indeed, the G1 1/2” water purifier cannot be used on ceramic basins. But this is a special Australian standard custom basin drain that can be done. Mai's bathroom is launched in the original G1 1/4” basin. A custom plastic replacement head was added under the unit to convert the G1 1/4" to G1 1/2" to meet the Australian sewage pipe requirements.Read More>>