Question: When we bought our 1927 suite in 2000, we were happy to see a big cast in the kitchen --iron sink.
My husband repaired it with epoxy.
Unfortunately, it didn't last long and now it looks very unattractive with a lot of chips and flaws.
I 've called a few places and asked for a renovation, but most of them don't recommend it because they say it won't last.
However, we really wanted to keep this sink.
What do you recommend? —
Washington a: You found that the epoxy coating looks good-at first.
It may be suitable for bathtubs that are used occasionally. For a hard-
However, the work of the kitchen sink does not replace the porcelain glaze.
There's a place-
Apparently there is only one place in the whole country.
You can get a classic actor there.
Iron Sink reapplied with real porcelain glaze.
This is my custom ceramic paint in Lenzburg. (618-475-2710; www. customceramic. com).
Owner John Ballantyne will blast the sink to remove residue from epoxy and raw lead
Based on porcelain glaze glass, apply the new porcelain glaze finish he baked in the kiln.
Karen harkler, executive vice president of porcelain glaze Research Institute (770-676-9366; www. Porcelain. com)
A trade group said that the repackaged porcelain glaze is not as thick as the original manufacturer wears, but the real porcelain glaze, which is much more durable than epoxy.
Hackler says he has shared technical information over the years with several people interested in starting a business who have focused on recalculating elegant old sinks and bathtubs, but he doesn't know who will
There are companies that apply porcelain glaze to signage, motorcycle parts and other objects.
But coated cast iron, about 25-
Chris Howell of Santa Rosa KVO Industries, California, says the inch thick is not the same as the thinner coated metal
His company produces a porcelain glaze logo, but it has some requirements to re-identify the sink and tub.
Therefore, KVO tried it and found that bubbles were formed in the finish because they used materials optimized for thinner metals.
In order for your sink to become a custom ceramic coating, you will need to enter the waiting list of Ballantyne by phone or email
Send him to jballantyne @ customeramic. com.
Once you are close to the top of the list, he will contact you and you will need to ship the sink to him with a crate.
He would be happy to provide instructions for this and would suggest that you look for a company with a loading dock to handle the shipping (
Receive when your sink is finished).
"I asked customers to use the local lumberyards, a local Kroger store," said Ballantyne . ".
He estimates that each route to the Washington area could cost $275.
Ballantyne looked at the pictures you sent and guessed that your sink was 66 inch long.
He will charge about $1,450 for sandblasting porcelain of this size and applying new white porcelain.
Question: I have a water shower head with brown and white lime deposits piled up on it.
Not only is it ugly, but it has blocked some holes.
I tried to clean the head with free butter and Zud powder scrub bathroom cleaner but neither seemed to work.
What is the best way to remove your deposit? —
Many Waterpik shower heads have rubber nozzles.
Rub them with your fingertips, or scrub them with an old toothbrush, usually destroying the shell so you can rinse it off.
If it doesn't work, the company recommends soaking the shower head with white vinegar.
In order to handle the shower head in place, fill the plastic bag in part with vinegar, slide it over the shower head and use kinks to put the bag there for hours with rubber bands or ropes.
Or screw down the shower head and soak it in a bowl full of vinegar.
To do this, slide a rag between the claw of the adjustable pliers and the threaded part of the shower head and turn counter-clockwise.
Let the Lotus head soak in the vinegar for about two hours and then reinstall it.
In both cases, the cleaning is done by running water through the shower head.
If you're lucky, vinegar will soften the deposits to enough, so that the water pressure will push them out of the hole.
Is there a problem with your house?
Send test questions tolocalliving @ jobpost. com.
Enter "how" in the subject line, tell us where you live and try to include the photos.
How to choose the right floor for coastal getawayHow how to align the kitchen cabinet door exhibition to restore the middle
How to replace the movement of the Ikea clock how to repair the old sewing machine how to find the bulb for the old Tensor lamp how to replace the missing part of the iron bed how to fix a heirloom, Radio