how to hang a ceiling fan properly - wall mount sink support

by:KEDIBO     2019-07-12
how to hang a ceiling fan properly  -  wall mount sink support
googletag. display("div-ad-articleLeader");
Credit: The opensourceciling fan can cool the room in the summer or keep warm air near the floor in the winter.
Most designs are used to accept lamps and there are many options in home improvement shops.
Due to the electrical connections involved and the considerable weight of the components, it can be challenging to hang the ceiling fan properly.
If you're trying to do it on your own, the process gets twice as hard as it's hard to take care of the heavy fan motor when trying to connect the wire with a wire nut on the ladder.
It is highly recommended that you follow the following installer in case the assistant helps you with your task.
Before starting the installation, go to the circuit breaker panel and turn off the power supply to the room where the fan ends up.
In this discussion, we will assume that you are replacing the existing ceiling fan.
West House 7801665 Comet 2-Light 52-
Inch Reversible five
Blade indoor ceiling fan, Frosted Black, frosted glass Amazon price: $144. 44 $83. 76 Buy Now(
Prices as of January 15, 2015)
Before you start, the material control fan socket boxWire nutsBlack electric spike or telescopic bracket tool needs a battery powered drill bit with a screwdriver (optional)
If you are replacing the old fan, please remove the hardware that holds it to the ceiling.
Remove the wire nut and any attached electrical tape.
Disconnect the ground wire.
Remove the fan from the hanger and drop to the ground with the assistant.
Prepare a solid ceiling bracket if the hole in the ceiling is located next to the ceiling beam, you can use a ceiling fan approved box to mount it directly to the side of the beam with nails or screws.
Make sure the box is securely attached to the pallet as it will support the weight of the fan.
Use 16 p nails and screws on all sides of the box.
If you are concerned about the weight of a particularly large fan, use one of the following methods, using adjustable support that spans two support beams.
There are two types of adjustable brackets for installing ceiling fans between ceiling beams.
One requires you to enter the attic to secure the bracket and the other does not.
Enter CeilingCredit: opensource when you enter the ceiling beam, enter the attic with a sliding bracket, place it on the drywall ceiling and screw the end into each beam.
Hang the box on the nut sliding along the adjustable track and lock the box in the proper position of the ceiling opening.
If you do not enter the ceiling support beam in the attic, you will not be able to enter the ceiling, remove the electric box in the ceiling passage through the empty hole in the ceiling, and place the rod perpendicular to the ceiling support beam.
Turn the bar to bite the end of the bracket into the support beam.
Use U-install the fan rated box on the rod
Bolt with support.
Install the panel and fan assembly ceiling directly onto the outlet box.
Pass the wires through the holes in the ceiling.
Screw the plate in with the included screws.
When you connect the wire, the fan can now hang from the ceiling.
Ceiling fans are installed near the ceiling, or if it is placed in a room with an arched ceiling or a very high ceiling, place it closer to the floor with an extension rod.
Typically, any new fan you purchase has an installation option.
The I fan usually includes a small extension rod of 6 to 12 inch, however, if the required distance is much larger than this, you can purchase an additional extension rod at any length to make it closer to the floor.
If you use the fan wire, please pass the fan wire through the canopy and the extension rod.
Temporarily hang the fan assembly from the hook on the ceiling.
West House lighting 0140000 Saf-T-
Ceiling fan holder, 3 teeth, twisted and locked Amazon price: $22. 10 $10. 00 Buy Now(
Prices as of January 15, 2015)
When the fan assembly is suspended from the ceiling, connect the wires together.
This will prevent you from having to put the fan on your shoulder while trying to connect the nut with one hand.
If you are uncomfortable with this, find someone to hold the fan motor while you are connecting the parts together.
Connect the white power cord to the white fan cord with the wire nut.
Wrap the external part with black tape and fix the nut in place.
Connect the black power cord to the black fan cord.
If the lamp has a second black wire, connect all three black wires together with a larger wire nut.
Wrap the whole nut with black tape.
Connect the ground wire.
Install the ceiling fan now you are ready for the final assembly.
Before you go further, it is better to turn the circuit breaker back on the box and verify that the connection is correct by flipping the light switch to see if the light is working.
Do not turn on the fan, however, as it may shake loose from the hook hanging on the ceiling.
However, if you do, don't forget to turn off the circuit breaker again.
This test is unnecessary if you are satisfied with your electrical skills.
Ceiling fan wiring is very easy to do.
Connect the fan motor to the canopy slide on the ceiling and tighten the mounting screws that come with the fan and ceiling.
Assemble the fan blade onto the stand and screw it in or break it in place.
If applicable, insert the appropriate number of bulbs and then connect the fixture to the bottom of the fan.
Modern fan 005,3-
Wall Mount and remote Amazon prices: $90. 00 $60. 00 Buy Now(
Prices as of January 15, 2015)
Installing ceiling fans is not a difficult task and can be done separately.
When you are wiring, be careful to hang the fan motor on the hook on the ceiling.
If you don't feel comfortable working with electricity, then you should hire a professional to do the whole job.
However, what I would say is that this is the easiest job to do, involving electricity, which can be done at home, and you should not have any problems if you take appropriate precautions.
Function articleAdMiddleLoad (){if (typeof jQuery ! = "undefined"){
Last position of Var = 0;
Minimum distance between Ads var = 1200;
Minimum distance from var at the bottom = 300;
Var adsToPlace = 20; for(var i = 1;
I /element is located after the ad & in the last position! $(this). hasClass(
"Article ")
/Element is not advertising &&($(this). position(). top -
Enough space between Ads & $ (". articleText"). height()-$(this). position().
Enough space from the bottom of the article | $ (this). prev(). hasClass(
"Article ")
/The previous element is a slide)){$(this). before($(
"ArticleAdMiddle ")); googletag. display("div-ad-
"I ");
$ (this). position(). top;
SpotFound = true; return false; }});
/If no location is found, stop looping and remove any remaining banner slots. if(! spotFound){for(var j = i;
J
Custom message
暂无友情链接数据
Chat Online 编辑模式下无法使用
Chat Online inputting...