When you remodel the bathroom, you need to choose at least one set of taps for your sink and vanity.
You need two taps in today's Chicago baths
One per sink.
Whether you install the faucet yourself or hire a professional plumber, you need to keep in mind that not all available faucet configurations can be used in the bathroom.
Before starting to choose the finish and style of the Aurora plumbing fixtures, you need to determine what kind of faucet configuration you need.
The configuration of the faucet determines whether it can be installed correctly on your vanity or sink.
There are several different configurations;
Getting familiar with the pros and cons of each type can help you make the right choice.
First of all, you need to choose a configuration that matches the style and size of the dresser or Basin of your choice.
If you put your heart on a special style faucet like wall-mounted, you may want to choose your Aurora pipe fixture first and then a sink that can use it.
Otherwise, choose the sink or vanity you like and then make sure you choose a faucet that is configured correctly to work seamlessly.
The most common faucet configuration is a single-hole or center-group faucet.
There is a single hole clamp for turning on or off the taps for hot and cold water and two taps to be installed on a base that will be installed in a hole on the edge of the Chicago bathtub sink.
This is the easiest faucet to install and it is relatively cheap to replace.
If you do the pipes yourself, you can save time and money because they are simple to install.
The central faucet is equipped with hot and cold handles installed around the faucet, but still mounted on a base.
These also apply to any modern or traditional bathroom.
They are popular as they are mixed with vanity tables of almost any size, but a separate hot and cold handle is provided to precisely adjust the water temperature.
If you're not sure which style you need, check out the Chicago bath showroom to see which style you like.
The widely used faucets attract some Chicago Koehler customers as they seem to be customized for larger vanity sets and sinks.
With an extensive unit, you need to drill three separate holes on top of the sink or on the dresser
Each of the hot and cold controllers has a central hole in the faucet itself.
These require more space because the holes need to be expanded on a width of 8 inch.
Not all dressers have so much space available, so be sure to measure the width of the holes on the dresser.
If there are three holes but the spacing is less than 8 inch, you will need to select the modified Chicago Kohler fixture for the smaller configuration;
These are commonly called mini-spread faucets.
Visit the Chicago bath showroom and compare the two styles of Aurora plumbing.
Wall-mounted faucets are very popular in contemporary and modern Chicago bath designs.
These unusual fixtures are mounted on the wall above the sink basin.
You can find the wall installation in the style of Chicago Kyler, whether it is the versatility of single or three holes.
Keep in mind that you will need to install these on the wall behind the sink, additional plumbing works and precise installation are required.
In most cases, you will want to hire plumbers or professional contractors to install wall-mounted faucets.
Many people who are transforming the Chicago baths turn to wall-mounted faucets because they make room for the counter or because they have a separate sink bowl installed instead of an integrated sink.
By installing the ledge, you can create a stylish look and minimize clutter on your dresser.
It is difficult to find the faucet using the separate sink Bowl, but the wall-mounted faucet is an ideal solution.
No matter what Chicago Kohler fixtures you prefer, visiting the Chicago bathroom showroom is a great way to discover the stylish Aurora plumbing fixtures that will perfectly complete the look of your bathroom.